- ATX or Micro ATX motherboard mounts (brass posts and screws included). Extended ATX motherboards will also fit (use the 9 ATX mounting points)
- You can install 1 or 2 power supplies of any length. The power supplies can be rotated 180 degrees thanks to our mirrored screw pattern (this way the PSU intake fan can be facing outwards for cooler air)
- The case has ample room to allow for easy access and natural airflow but if necessary you can install up to 5 case fans, 120 mm. On the lower level 3 fans can be installed to cool the motherboard, CPU, hard disk etc. (works very well!). On the upper level you can mount up to 4 fans to cool the graphic cards. Our tests have shown a substantial drop in GPU temperature with the fans installed but keep in mind that the amount of cooling is entirely dependent on your own local conditions, the type of fans and the graphic cards used.
- Included rubber grommets for clean routing of GPU and fan cables. Very helpful to reduce cable clutter that can impair airflow.
- There are 3 spots pre-drilled for standard 2,5" hard disks or SSD drives. This allows you to mount your drive in the best possible position according to your motherboard layout and accessories used.
- All screws and special hardware necessary are included.
- Another advantage is that the Deeptech Air allows you to upgrade at any time. You can start out with a single GPU, a single PSU and as the unit makes you money, you can add more cards and a second power supply. The case fans are not an absolute necessity and as can be seen on the pictures the mounting pattern of the fans is designed to let air flow naturally when no fans are installed.
Dimensions:
- Width: 67,0 cm
- Depth: 38,0 cm
- Height: 36,0 cm
- Shipping weight: 6 Kg
- galvanized
Other info:
The case is sold as a kit and needs to be assembled by you. It takes around 15 minutes and all you need is a couple of Philips screwdrivers. It is sold without any components, what you see on the pictures is for illustration purposes only. You get all necessary hardware necessary to assemble the case, motherboard and hard disk/SSD. The unit is stackable, just make sure you have enough air flowing to keep things cool...
